Outback Power Products

DIN Mount Breakers

DIN rail mount with set-screw compression terminals, #14 to 2 AWG clamp terminals.

OBB-15-120VAC-DIN
15 Amp 120VAC 50/60Hz single pole 0.50" (13 mm) wide Branch Circuit Rated 10k AIC

OBB-15D-240VAC-DIN
15 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC

OBB-20-120VAC-DIN
20 Amp 120VAC 50/60Hz single pole 0.50" (13 mm) wide Branch Circuit Rated 10k AIC

OBB-20D-240VAC-DIN
20 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC

OBB-25D-240VAC-DIN
25 Amp 120/240VAC 50/60Hz dual pole 1.0" (26 mm) wide Branch Circuit Rated 10k AIC

OBB-10-277VAC-DIN
10 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide

OBB-15-277VAC-DIN
15 Amp 277VAC 50/60HZ single pole 0.5" (13 mm) wide

OBB-30-277VAC-DIN
30 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide

OBB-30D-480VAC-DIN
30 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide

OBB-30T-480VAC-DIN
30 Amp 277/480VAC 50/60Hz three pole 1.5" (39 mm) wide

OBB-50-277VAC-DIN
50 Amp 277VAC 50/60Hz single pole 0.5" (13 mm) wide

OBB-50D-480VAC-DIN
50 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide

OBB-50T-480VAC-DIN
50 Amp 277/480VAC 50/60Hz three pole 1.5" (39 mm) wide

OBB-60-277VAC-DIN
60 Amp 277/480VAC 50/60Hz single pole 0.5" (13 mm) wide

OBB-60D-480VAC-DIN
60 Amp 277/480VAC 50/60Hz dual pole 1.0" (26 mm) wide

Panel Mount Breakers

Front panel, single pole mount with stud terminals on the back. Ring terminals required.

OBB-1-150VDC120VAC-PNL
1 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-5-150VDC120VAC-PNL
5 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-10-150VDC120VAC-PNL
10 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-15-150VDC120VAC-PNL
15 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-20-150VDC120VAC-PNL
20 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-30-150VDC120VAC-PNL
30 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-30-250VAC-PNL 30 Amp, 250VAC, 1/4" stud terminals

OBB-40-150VDC120VAC-PNL
40 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-50-150VDC120VAC-PNL
50 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-60-150VDC120VAC-PNL
60 Amp, 150VDC and 120VAC, 1/4" stud terminals

OBB-80-150VDC-PNL
80 Amp, 150VDC, 1/4" stud terminals

OBB-100-125VDC-PNL
100 Amp, 125VDC, 5/16" stud terminals

OBB-125-125VDC-PNL
125 Amp, 125VDC, 5/16" stud terminals

OBB-175-125VDC-PNL
175 Amp, 125VDC, 3/8" stud terminals

OBB-250-125VDC-PNL
250 Amp, 125VDC, 3/8" stud terminals

Ground Fault Protection

Front panel mount with stud terminals on the back. Ring terminals required.

OBB-GFP-80D-125VDC-PNL
OutBack PV Ground Fault Protection for one or two MX charge controllers. 80 Amp 125VDC dual pole Panel mount - uses three 0.75Ó (19 mm) mounting spaces.